Need help?Do you have a question about the Traxxas EREVO and is the answer not in the manual?
General| Type | Monster Truck |
|---|---|
| Drive Type | 4WD |
| Suspension | Independent |
| Battery | 7.4V |
| Top Speed | 50+ mph (80+ km/h) |
| Radio System | 2.4GHz |
Overview of procedures to get your model running, from safety to maintenance.
Instructions for online product registration for better customer service.
Explains warning icons and references for better manual navigation.
Information on contacting Traxxas for technical support and online community.
Crucial safety rules including avoiding public roads, crowds, and radio interference.
Safety guidelines for handling, charging, and storing batteries to prevent hazards.
Lists the specialty metric tools provided with your E-Revo model.
Lists essential tools and equipment needed to operate and maintain the model.
Lists optional but recommended tools for an R/C toolbox.
Overview of procedures to get your model running, from safety to maintenance.
Definitions of key terms used in the manual related to radio and power systems.
Crucial precautions for the radio system antenna to maintain signal range.
Instructions for installing AA batteries into the TQi transmitter.
Guidance on choosing compatible NiMH or LiPo batteries and appropriate Traxxas chargers.
Explains transmitter controls and basic adjustments like steering and throttle trim.
Instructions for operating the radio system, including range testing and binding.
Explanation of how Traxxas Stability Management helps maintain control in low-traction situations.
Explains how the transmitter stores and recalls settings for multiple models.
Using a smartphone/tablet with the Wireless Module for advanced tuning via the Traxxas Link App.
How to verify and activate Low-Voltage Detection for LiPo battery safety.
Step-by-step calibration of the ESC and transmitter for optimal operation.
Guide to selecting different operating profiles (Sport, Race, Training) for the ESC.
Explains the meaning of LED indicators and various protection modes of the ESC.
Important precautions to keep in mind before and during driving.
Information on factors affecting run time and tips to increase it.
Guidelines and precautions for operating the model in wet environments.
Procedures for cleaning and maintaining the model after running in wet conditions.
Instructions for removing and installing the receiver while maintaining the watertight seal.
Adjusting springs, sag, and ride height for optimal suspension performance.
Adjusting toe and camber angles for precise alignment and handling.
Adjusting the slipper clutch for proper power transfer and tire spin.
Considerations for selecting and using aftermarket wheels and tires.
Adjusting pinion and spur gears for acceleration, top speed, and motor temperatures.
Adjusting the dual-servo steering system for proper center and responsiveness.
Checklist for inspecting the vehicle for any signs of damage or wear.
Periodic maintenance tasks like checking slipper clutch pads and chassis.
Procedures for cleaning, lubricating, and maintaining the model's motors.
Ensuring shock oil levels are full and inspecting for leaks.
Periodically inspecting suspension pins, turnbuckles, gears, and driveline for wear.
Guidelines for proper storage of the model and batteries.
Adjusting front caster angle to influence understeer/oversteer handling.
Adjusting caster and outer toe link position to eliminate unwanted steering changes.
Adjusting roll center by changing upper control arm mounting holes to affect roll stiffness.
Changing rocker arms to adjust suspension travel and progressive rate.
Table detailing outer toe link end positions for bump steer elimination based on settings.
Replacing pistons to vary damping effect by changing bypass hole sizes.
Adjusting differential oil viscosity for optimal traction and handling.
Guide for installing aftermarket motors, including CG options.
Adjusting throttle sensitivity (exponential) for finer throttle control.
Adjusting steering percentage (dual rate) to control maximum steering throw.
Adjusting brake percentage for nitro models, or for electric models for a simulated brake.
Explanation of the throttle trim seek mode to prevent accidental runaways.
Fine-tuning servo travel range limits to prevent binding.
Precisely setting the neutral point of steering or throttle servos.
Disabling the Multi-Function knob to prevent accidental changes to settings.
Built-in failsafe function that returns throttle to neutral on signal loss.
Explains the meaning of different LED colors and patterns on the transmitter.
Explains the meaning of different LED colors and patterns on the receiver.
Explains how the transmitter stores and recalls settings for multiple models.
Using a smartphone/tablet with the Wireless Module for advanced tuning via the Traxxas Link App.
To Next Page