Traxxas ez-peak live 2971 User Manual

Cycle Complete
(solid)
NiMH/LiPO FAST CHARGER INSTRUCTIONS
Covers Part #2971
Thank you for purchasing the Traxxas EZ-Peak Live™ charger.
This charger features exclusive Traxxas innovations that make
charging batteries easier and safer than ever. If you have any
questions or concerns about your charger, please contact our
customer support team for fast, friendly answers and solutions.
Contact information is at the bottom of this page.
WARNING! For best charging results and your safety, it is
essential that you read and understand these instructions,
warnings, and precautions before using the charger. Charging
and discharging batteries has the potential for serious injury
and damage to property. Use care when charging and follow all
instructions and cautions.
iD LogoBattery Type
Traxxas High-Current
Connector
1. Plug the charger into an AC wall outlet and connect the battery
2. Verify the charge settings
Charging Traxxas iD NiMH Batteries
Battery type selected must match the battery type shown on the battery.
The charger will recognize the iD battery
and show you the charge settings.
HKC16014-R00 160818
TRAXXAS.com
Traxxas, 6250 Traxxas Way, McKinney, TX 75070, Phone: 1-888-TRAXXAS (Toll-free, US only) or 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
3. Charging
Press and hold the Start button
for 2 seconds. The charger will
play a tone, indicating that
charging has started. Press once
to stop. The charger will play a
tone, indicating that charging
has been canceled. The charge
progress LEDs will light as the
battery charges.
4. Charge cycle complete
Identifying iD Batteries
LiPo battery shown, NiMH battery similar
A. Battery iD Start/Stop
B. LiPo Charge Mode Select
C. App Live LED
D. Charge Status LED
A
B
C
F
G
D
E
Charge
Status
Charge
Progress
E Charge Progress LEDs
F. Charger Output Port (Traxxas High-Current Connector)
G. 2S/3S/4S Lipo Balance Ports (pull to remove cover)
H. Bluetooth® Button
Battery Type
Start
Charging
(flashing)
Charge Cycle Progress
The charger will play a complete tone, followed by a beep to indicate
charging is complete.
The EZ-Peak Live will trickle charge your NiMH battery at a minimum of
100mA for 12 hours after the charge cycle is complete.
H
Intelligent battery charger
2971

Traxxas ez-peak live 2971 Specifications

General

Brand	Traxxas
Model	ez-peak live 2971
Category	Battery Charger
Language	English

Summary

Traxxas EZ-Peak Live Charger Instructions Overview

Identifying Traxxas iD Batteries

Explains how to identify Traxxas iD batteries, including connectors and logos.

Charging Traxxas iD NiMH Batteries

Step-by-step guide for charging NiMH batteries using the charger and iD technology.

Traxxas EZ-Peak Live LiPo Battery Charging and App Integration

Charging Traxxas iD LiPo Batteries

Detailed instructions for charging LiPo batteries using iD technology, covering steps 1-4.

LiPo Charging Modes Explained

Describes the different LiPo charging modes: Storage, Fast, and Balance Charge.

Pairing Charger with EZ-Peak Live App

Guide to pairing the EZ-Peak Live charger with a mobile device via Bluetooth for app control.

Advanced Battery Charging via EZ-Peak Live App

Charging Traxxas iD Batteries via App

Using the EZ-Peak Live App to charge Traxxas iD batteries, including settings verification.

Charging Non-iD Batteries via App

Using the EZ-Peak Live App to charge batteries without Traxxas iD, selecting type and settings.

Charger Troubleshooting, Updates, and Safety

Charger Error Codes and Solutions

Lists common error codes displayed by the charger and their corresponding troubleshooting solutions.

Firmware Updates and Critical Safety Warnings

Information on updating charger firmware and critical safety warnings for LiPo batteries.

Warranty Information and General Precautions

Details Traxxas warranty and essential charging/handling precautions for all battery types.

Regulatory Compliance

FCC Statement and Compliance

Details the FCC compliance statement, rules, and measures for minimizing interference.