Need help?Do you have a question about the Traxxas Jato 3.3 5507 and is the answer not in the manual?
General| Engine | Traxxas 3.3 Racing Engine |
|---|---|
| Scale | 1/10 |
| Drive Type | 2WD |
| Top Speed | 65+mph (105+kmh) |
| Radio System | TQ 2.4GHz Radio System |
| Chassis Type | Aluminum |
| Suspension | Independent |
| Shock Type | Oil-filled |
| Brake Type | Disc |
| Body | Polycarbonate |
| Front Track | 10.5 in (267 mm) |
Traxxas support is available to help you with your model's operation and features.
Provides a step-by-step guide to get your model running quickly and safely.
Contact Traxxas Technical Support for questions about your model or its operation.
Register your product online at Traxxas.com/register for better customer service.
Key safety guidelines for operating the fast and powerful Jato model.
Guidelines for safe handling and charging of rechargeable batteries.
Specialty metric tools included with your Jato for basic maintenance.
Additional tools and supplies needed to operate and maintain your Jato.
Overview of the TQi 2.4GHz transmitter and its features for new and advanced users.
Key terms and definitions related to the radio and power systems.
Essential precautions to ensure proper radio system range and operation.
Visual representation of the TQi radio system components and their connections.
Information on the charging jack for optional rechargeable batteries.
Procedure for installing AA batteries or an optional RX Power Pack into the receiver.
Instructions for installing an optional 5-cell NiMH RX Power Pack.
Details on the optional TRX Power System for charging batteries.
Instructions for installing 4 AA batteries in the TQi transmitter.
Essential rules for operating the transmitter and receiver safely.
Identification and function of the transmitter's controls and indicators.
Adjusting throttle neutral and steering trim for proper control.
Checking and setting the radio system's basic alignment and operation.
Procedure to ensure reliable radio communication before each use.
Steps to electronically bind the transmitter and receiver for proper communication.
Adjusting steering response using the Multi-Function knob for improved control.
Proper installation and care of the receiver's antenna wire.
Overview of the TRX 3.3 Racing Engine's power and design.
Critical procedure for fitting internal engine components for optimal performance.
Importance of cleaning and oiling the air filter for engine longevity.
Procedure to prevent internal engine corrosion after use.
Definitions of key terms related to the TRX 3.3 Racing Engine.
Information on selecting and handling the correct fuel for the TRX 3.3 engine.
Guide to selecting the appropriate nitro content for optimal engine performance.
Safety guidelines and procedures for proper fuel management.
Instructions on how to fill the Jato's fuel tank using the included bottle.
Details on the air filter's importance and design for engine protection.
Step-by-step guide for cleaning and oiling the air filter assembly.
Explanation of carburetor functions and air/fuel mixture control.
How high-speed and low-speed needles control air/fuel ratio for engine performance.
Overview of the EZ-Start system for convenient push-button engine starting.
Instructions for charging the 7.2-volt EZ-Start battery pack.
Recommended initial carburetor adjustments for engine break-in.
Step-by-step guide for installing the battery into the EZ-Start controller.
How to operate the EZ-Start system for starting the engine.
Procedure for safely shutting down the engine using the fuel line clamp.
Detailed steps for the break-in process to ensure engine longevity and performance.
Instructions for starting the engine for the initial break-in run.
Break-in procedure for the first tank of fuel, focusing on gentle acceleration.
Break-in procedure for the second tank, increasing throttle input.
Break-in procedure for the third tank, further increasing throttle duration.
Break-in procedure for the fourth tank, increasing throttle to full.
Break-in procedure for the fifth tank, holding full throttle longer.
Specific advice for performing engine break-in in cold weather conditions.
Guide to adjusting fuel mixture for optimal engine performance.
How to lean the high-speed mixture for increased performance.
Adjusting the low-speed mixture using the pinch test.
Table showing how conditions affect fuel mixture settings.
Setting the minimum reliable idle speed for the engine.
Adjusting fuel mixture and idle speed based on weather conditions.
Using temperature as a guide for fine-tuning engine performance.
Essential tips for safely operating and handling the Jato at speed.
Adjusting springs, ride height, and shock mounting for optimal suspension performance.
Details on spring rates, preload adjustment, and optional springs.
How to adjust ride height using spring preload adjusters.
Impact of shock mounting positions on suspension travel and spring rate.
Critical alignment settings for optimizing Jato's handling characteristics.
Instructions for draining, filling, and bleeding the shock absorbers.
Adjusting the toe angle of the front and rear wheels for precise handling.
Information on available shock piston sizes and their effect.
Adjusting camber links to set the static camber angle for each wheel.
How to tune swaybars for optimal roll resistance and handling.
Overview of the Jato's bellcrank steering system and servo saver.
How to adjust the servo saver for precise steering response and gear protection.
Procedure for adjusting the brake linkage and setting brake pad gap.
Adjusting shoulder screws to set the correct brake pad gap.
Adjusting the two-speed transmission and slipper clutch for performance.
How to adjust the Torque Control™ slipper clutch for traction and drivetrain protection.
Modifying the shift point for optimal acceleration and drivability.
Setting the correct gear mesh for smooth transmission operation.
Routine maintenance tasks required every hour of operation.
Essential tasks to perform after each driving session for engine care.
Checks for wear on gears, connecting rod, and slipper clutch pads.
Step-by-step guide for preparing the engine for storage.
Procedure to clear excess fuel if the engine becomes flooded.
Advanced tuning for suspension and alignment for maximum performance.
Adjusting front caster for understeer/oversteer balance.
Adjusting roll center for improved vehicle roll stiffness and traction.
Changing camber link attachment for altered suspension compression response.
Adjusting wheelbase for improved responsiveness on different tracks.
Using optional limiters to control suspension down travel.
Adjusting gear ratios and differential fluid for performance tuning.
How to change gear ratios using clutch bell and spur gears.
Adjusting differential performance with silicone fluid viscosity.
Setting Multi-Function knob for throttle response control.
Setting Multi-Function knob for steering throw percentage.
Setting Multi-Function knob for brake throw control.
Setting Multi-Function knob for throttle trim adjustment.
Interpreting transmitter LED status indicators for various modes and errors.
Interpreting receiver LED status indicators for various modes and errors.
Diagram showing how to navigate the transmitter's settings menu.
Using Traxxas Link app and Docking Base for advanced transmitter programming.
To Next Page
