Need help?Do you have a question about the Traxxas Jato 3.3 and is the answer not in the manual?
General| Scale | 1/10 |
|---|---|
| Engine | TRX 3.3 Racing Engine |
| Drive System | 2WD |
| Transmission | 2-Speed Automatic |
| Chassis | Molded Composite |
| Width | 12.9 inches (328mm) |
| Radio System | TQi 2.4GHz Radio System |
| Fuel Tank Capacity | 75cc |
| Recommended Age | 14+ |
| Fuel Type | Nitro |
| Top Speed | 60+ mph |
| Suspension | Independent |
| Shock Type | Oil-filled |
| Brake Type | Disc Brake |
Provides contact information for technical assistance and service needs.
An overview of procedures to get your model running quickly.
Provides contact information for technical assistance and service needs.
Instructions for registering your product online for better customer service.
Crucial safety advice for operating the Jato model responsibly.
Guidelines for safe and proper handling, charging, and storage of batteries.
Lists the specialty metric tools included with the Jato model.
Lists useful items for any R/C toolbox, not required for operation.
Lists essential items that need to be purchased separately for operation.
Overview of the TQi 2.4GHz transmitter and its features for R/C enthusiasts.
Explains key terms related to the radio and power systems used in the manual.
Important warnings regarding antenna wire and radio range to ensure safe operation.
Details the components of the TQi radio system, including transmitter and receiver.
Illustrates the electrical connections for the Jato 3.3 model's radio system.
Introduces the TRX 3.3 Racing Engine, highlighting its power and design.
Details the critical procedure for breaking in the TRX 3.3 Racing Engine for optimal performance.
Explains the importance and procedure for maintaining the air filter for engine longevity.
Outlines the steps for after-run maintenance to prevent engine corrosion.
Sets the stage for driving the Jato after break-in and tuning, with important precautions.
Provides essential advice for operating the high-performance Jato model safely and effectively.
Covers adjustments for springs, ride height, and shock mounting positions.
Details the Jato's steering system geometry and servo saver adjustment.
Explains brake adjustment, pad wear, and linkage settings for proper braking control.
Covers adjusting the slipper clutch and the two-speed transmission for optimal performance.
Routine checks and cleaning required after every hour of operation.
Procedures to follow after each driving session for vehicle inspection and maintenance.
Essential steps to protect the engine from corrosion during storage or periods of inactivity.
Advanced adjustments for caster, rear anti-squat, and roll center for handling optimization.
Adjusting camber gain geometry for improved vehicle stability and traction.
Fine-tuning Jato's wheelbase for improved responsiveness or stability.
Explains the use of optional limiters to manage suspension travel for specific track conditions.
Using the Traxxas Link app for tuning, telemetry, and model management.
Covers throttle trim, failsafe, LED codes, and factory reset procedures.
Fine-tuning steering sensitivity, end points, sub-trim, and brake settings.
Managing model data, locking models, and deleting models from transmitter memory.
Guide to navigating the TQi transmitter's menu tree and using menu tree formulas.
To Next Page