Traxxas LaTrax Prerunner - Getting Started with Your Model; Installing the Battery Pack

8
GETTING STARTED
INSTALLING THE BATTERY PACK
Your model includes a 7.2V 6-cell NiMH battery pack.
Follow these steps to install the battery:
1. Remove the body
clip from the battery
hold-down,
and then remove the
battery hold-down.
2. Install the battery
pack into the battery
compartment with
the battery wires
facing the front of
the model.
3. Reinstall the battery
hold-down, making
sure not to pinch
the battery wires.
Secure the battery
hold-down with the
body clip. Do not connect the battery pack to the
ESC at this time.
Note: Always unplug the battery and remove from the
model after use.