Need help?Do you have a question about the Traxxas RUSTLER VXL and is the answer not in the manual?
General| Frequency band | 2.4 GHz |
|---|---|
| Battery capacity | 4000 mAh |
| Battery technology | Nickel-Metal Hydride (NiMH) |
Weight and Dimensions| Width | 311 mm |
|---|---|
| Weight | 1690 g |
Contact information and support resources for Traxxas customers.
Overview of procedures to get your model running quickly.
Traxxas customer service contact details and support options.
Key safety advice and precautions for operating the model.
Guidelines for safe handling, charging, and care of battery packs.
Specific safety precautions and handling procedures for LiPo batteries.
List of tools provided with your Traxxas model.
List of essential tools and equipment to purchase separately.
List of optional but recommended tools for an R/C toolbox.
Instructions on how to apply decals to your model.
Procedure for gluing replacement tires to the model's rims.
Steps for installing a replacement wing on the Bandit VXL.
Description of the transmitter and its controls.
Diagram illustrating the electrical connections for the model.
Description of the VXL-3s electronic speed control unit.
Guidance on selecting and using the appropriate battery charger.
Glossary of terms related to Traxxas radio and power systems.
Details on battery requirements and construction for optimal performance.
Information about the Traxxas High Current Connector for power delivery.
Procedure for installing AA batteries into the TQ transmitter.
Steps to install the battery pack into the RC model.
Advice on selecting and using the correct batteries for the transmitter.
Instructions for installing and positioning the antenna mast.
How to adjust the throttle neutral point on the transmitter.
How to adjust the steering neutral point on the transmitter.
How to change the direction of the steering or throttle servos.
Essential rules for safe and proper operation of the radio system.
Steps to check and adjust the factory radio system settings.
Procedure for testing radio system range and functionality.
Configuring Low-Voltage Detection for NiMH and LiPo batteries.
Setting transmitter defaults before programming the ESC.
Steps to calibrate the ESC with the transmitter and set profiles.
Instructions on how to operate the VXL-3s ESC for forward, brake, and reverse.
How to change between Sport, Race, and Training modes on the ESC.
Understanding the meaning of LED indicators on the VXL-3s ESC.
Factors affecting the model's run time, such as battery type.
Strategies to maximize the model's operational run time.
Procedure for setting the correct gear mesh between spur and pinion.
How to set the front wheel toe-in for optimal handling.
How to adjust the wheel camber angle for better grip.
Adjusting shocks, oil viscosity, and ride height for handling.
Information about compatible wheels and tires for the model.
Procedure for adjusting the slipper clutch to prevent tire spin.
How to properly center the steering servo before installation.
Instructions for adjusting the wheelie bar height on the Stampede.
Maintenance for slipper clutch pads and friction material.
Procedure for cleaning and inspecting the model's chassis.
Maintenance for the steering system components.
Maintenance for the shock absorbers, including oil levels.
Periodic inspection of suspension components for damage.
Inspection of driveline components for wear and binding.
Procedures for storing the model and transmitter properly.
Troubleshooting steps when the radio system fails to operate.
Diagnosing and resolving issues with reduced radio range.
Troubleshooting when the motor does not run, but steering works.
Troubleshooting steps for a non-functional steering servo.
Steps to resolve issues preventing ESC programming.
Diagnosing causes for slow model speed or acceleration.
Troubleshooting why the model is not moving in reverse.
Addressing issues causing the spur gear to strip.
Chart showing recommended gear ratio combinations.
Formula for calculating the final gear ratio of the model.
Guidance on using LiPo batteries for advanced users.
Information about sensorless brushless motor operation.
Information about sensored brushless motor compatibility.
Monitoring motor and ESC temperatures and cooling methods.
Information on the optional heat sink cooling fan for the ESC.
Technical specifications for the Velineon 3500 brushless motor.
To Next Page