TREBLAB HD-Force - Wireless Connectivity; Bluetooth Pairing and Reconnecting

Turn OFF
Press and hold the POWER button for 3 seconds. You will hear the sound cue
and all the lights will go OFF.
WIRELESS PAIRING
Make sure TREBLAB HD-Force is fully charged.
1. Turn ON your speaker. You will see the BLUE state indicator flashing, meaning
that the speaker is in pairing mode.
2. Activate the Bluetooth mode on the source device (smartphone, tablet, laptop).
3. Select TREBLAB HD-Force from the Bluetooth devices list. Keep the speaker
within 3 feet /1 meter from the source device while pairing.
4. If prompted to connect by your device, select Yes.
5. If requested a passcode, enter 0000.