Turn ON your speaker by pressing and holding the POWER button for 3 seconds.
You will hear the sound cue, and the LED will start flashing BLUE indicating that the
speaker is in pairing mode.
Activate the WIreless Mode on your device (smartphone, tablet, laptop).
Select TREBLAB HD7 from the Wireless devices list. Keep it within 3 feet / 1 meter
of the speaker while pairing.
If necessary, enter passcode 0000.
Once HD7 is successfully paired and connected, the LED will stop flashing and
stay BLUE.
1.
2.
3.
4.
5.
RE-PAIRING
After the initial pairing, the speaker will automatically connect to the previously
paired device when turned ON again. If the reconnection does not happen
automatically, the speaker will start looking for any other previously paired device
within the effective distance range. TREBLAB HD7 can remember up to 8
recently paired devices.
To Next Page
Loading...
