Now you can use the speakers in stereo mode. Kindly note that the maximum
distance between speakers should not exceed 33 feet / 10 meters
NOTE: If the speakers were already paired with each other, you would skip the
TWS pairing steps, as they will switch to the stereo mode automatically. After
turning both speakers ON simultaneously, wait for “Stereo mode” voice
prompt. Then turn on the Bluetooth mode on your smart device, and the
speakers will connect to it seamlessly.
To disable the TWS function:
While both speakers are ON, press and hold the VOLUME + and VOLUME - buttons
simultaneously on one of the speakers until you hear the “Disconnected” voice
prompt indicating the connection is lost.
AUDIO PLAYBACK
To pause and resume the playback when connected wirelessly, press the PLAY
button.
To adjust the volume, press the VOLUME + or the VOLUME - button while
listening to music.
To Next Page
Loading...
