To change the track on the HD7, press and hold the VOLUME + or the
VOLUME - button for 2 seconds.
3.5 MM AUDIO CABLE CONNECTION
You can connect TREBLAB HD7 to compatible devices using the supplied
3.5 mm audio cable.
Plug one end of the 3.5 mm audio cable into the 3.5 mm cable port on the bottom
side of the speaker (under the cover). Plug the other end into the 3.5 jack on your
device.
Turn the speaker ON. You will hear the sound cue and the LED light will turn
GREEN. Now you can play music and audio.
NOTE: On-device control is not supported for the VOLUME, NEXT, PREVIOUS and
PAUSE functions when using the 3.5 mm audio cable. Phone calls management
using the PLAY / PAUSE button is not supported. To make adjustments you will
need to use your smart device.
To Next Page
Loading...
