7
Step 9
Use the TEST button to open and
close actuator. The timer screen
will show CLOSED any time a
battery is replaced. Press the TEST
button to sync timer with actuator.
After pressing TEST, the actuator
will always finish in the closed
position.
Step 10
For an extra measure of
weatherproofing, after the unit has
been completely assembled we
recommend using the included
silicone to seal around leg
brackets and around the feeder
tube assembly connection to
the hopper. Allow 24 hours for
silicone to completely cure.
OM_FDRP600AS.indd 8OM_FDRP600AS.indd 8 3/25/2024 10:03:05 AM3/25/2024 10:03:05 AM
To Next Page