Treif PUMA-CE 1100 /EB

Need help?

Do you have a question about the Treif PUMA-CE 1100 /EB and is the answer not in the manual?

Summary

Information on the Operating Instructions

On-the-job safety symbol

Explains the safety symbol used for instructions related to work safety and danger to health and life.

Technical Data

Range of Operation and Intended Application

Safety

On-the-job Safety Instructions

Provides essential safety instructions for operating the machine, covering intended use and organizational measures.

Qualification and Duties of Staff

Details the required qualifications and duties of personnel operating, maintaining, or repairing the machine.

Warning Signs on the Machine

Electrical Installation

Trial Run

Sense of Rotation Test of the Electric Motor

Performance Test of the Safety Switches

Safety Monitoring Functions

Mount; Change of Knife

Method of Operation of the Control

Adjustment of Mode of Operation

Program Parameters

Cutting Zones - Definition

Operating Mode Single Knife (Single)

Operating Mode Double Knife (Single)

Operating Mode Single Knife RS Cutting within a Cutting Range

Alter Cutting Parameters

Operating Mode Single Knife RS Cutting within Several Cutting Ranges

Operating Mode Single Knife LS Cutting with Empty Cuts

Cutting Products

Running the Cutting Program

The Single-Cut Function

Return Travel Limitation of the Product Feed Holder

BRAKE RELEASE Push-button

Place the Product Properly!

Cleaning

Preparatory Work for Cleaning

Removing the Knife

Removing the Product Feed Holder

Instructions for Cleaning

Safety Instructions for Cleaning

Lists safety instructions for cleaning, including PPE and precautions for high-pressure cleaning.

Cleaning and Disinfection Plan

Remounting after Cleaning

Mounting of Knife

Screw on Counterblade

Maintenance

Regular Maintenance Work

Knife Sharpening

Greasing of the Feed Guide Part

Adjustment of the Counterblade

Adjustment of the Counter-blade

Check the space between the counterblade and the knife

Instruction to check the gap between the counter-blade and knife.

Readjust Distance of the Counter-blade

Height Adjustment of the Counter-blade

Retensioning the Conveyor Belt

Setting Spacing between Conveyor and Counter-blade

Fault Finding

Cuts are not cut through properly

Addresses improper cuts due to knife tip wear or bone fragments.

Repair Instructions

No LCD Display

Troubleshoots the "No LCD display" failure, suggesting replacement of fuses, display, or control units.

Knife Motor Does Not Run

Service Menu

General Operation

Calibration Routine

Stockkeeping of Spare Parts