Trek 6i, 8i, 9i, 11i User Manual

CONTENTS
Safety and general guidelines
...............................
i
Functions
..............................................................
1
Installation
........................................................
2-3
Setting the computer
........................................
4-7
6i, 8i
...............................................................
.
4-5
9i, 11i
..............................................................
6-7
Changing functions and other normal use
..........
8
Replacing the battery
...........................................
8
Troubleshooting and Warranty
............................
9
SAFETY AND GENERAL GUIDELINES
While riding your bicycle, do not stare at the computer for long
periods of time (Figure 1). If you do not watch the road, you
could hit an obstacle, which may cause you to lose control and
fall.
Make sure the computer wire cannot contact the tire or wheel
spokes. The wire could be damaged causing the computer to
malfunction. Also, the wire could get caught, causing you to
lose control and fall.
TREK INCITE
Bicycle Computer Owner’s Manual
This manual explains the installation and use of several Trek bicycle computer models:
• Incite 6i
Incite 8i
• Incite 9i
Incite 11i
Please read this manual carefully and save it for future reference.
If you do not understand the information in this manual, or you have a question about your Incite
computer that this manual does not cover, consult your Trek dealer. If you have a question or problem
that your Trek dealer can’t handle, contact us at:
Trek Bicycle Corporation
Attn: Customer Service
801 W. Madison Street
Waterloo, Wisconsin 53594
http://www. trekbikes.com (920) 478-4670
© Copyright Trek Bicycle Corporation
2004 All rights reserved
Figure 1- Watch the road
when riding.
Figure 2- Keep the wire
out of the spokes

Trek 6i, 8i, 9i, 11i Specifications

General

Brand	Trek
Model	6i, 8i, 9i, 11i
Category	Bicycle Accessories
Language	English

Summary

Safety and General Guidelines

Functions

Installation

Placing the computer on the handlebar

Details steps for mounting the computer unit onto the bicycle's handlebar, ensuring secure placement.

Placing the magnet and sensor(s) on the bike

Explains how to correctly attach the wheel magnet and sensor to the bicycle's spokes and frame.

Attaching the computer wire

Provides instructions for routing and securing the computer wire along the bicycle frame and fork.

To install the sensor

Guides on aligning and attaching the sensor to the wheel and checking for correct speed display.

Setting the Computer

To set Odometer and Wheel size

Guides on setting the odometer value and selecting the bicycle's wheel size for accurate measurement.

To set Custom wheel size

Details the process for inputting custom wheel sizes not listed in the standard tables.

Setting Clock for Incite 6i/8i

Instructions for setting the device's internal clock to 12 or 24-hour format and the correct time.

To Restart the trip modes

Explains how to reset trip distance, average speed, and time modes back to zero for a new ride.

To set second wheel size

Allows setting a second wheel size for use with a different bicycle, enabling accurate data on multiple bikes.

To select Wheel 2

Details how to switch between the primary and secondary wheel size settings on the computer.

To set Units (distance and temperature)

Guides on selecting preferred units for distance (MPH/KPH) and temperature (Fahrenheit/Celsius).

To set Odometer

Instructions for manually setting the odometer to a specific value, overriding the default zero.

Setting Clock for Incite 9i/11i

Instructions for setting the device's internal clock to 12 or 24-hour format and the correct time.

To set the wheel size

Guides for setting the primary wheel size for accurate speed and distance calculations.

To set the second wheel size

Instructions for setting a secondary wheel size for use with a different bicycle.

To set a custom wheel size

Guides for entering custom wheel dimensions not found in standard presets.

To select the wheel size

Details how to switch between the primary and secondary wheel size configurations.

To restart the trip modes

Explains how to reset trip distance, average speed, and time modes back to zero for a new ride.

Changing Functions and Other Normal Use

Changing mode

Explains how to navigate through the computer's various functions using the mode button.

Removing the computer from the computer base

Provides instructions on how to detach the computer unit from its mounting base.

Using the computer in wet weather

Offers recommendations for protecting the computer from water damage during wet conditions.

Replacing the battery

Detailed steps for opening the unit, replacing the battery, and reassembling the computer.

Troubleshooting

Common problems and solutions

A table listing common issues like blank screen or erratic data, with their causes and solutions.

Limited Warranty