Trek Procaliber 6 - Bicycle Specifications; Chain Line and Chain Ring; Rear Brake Mount; Rear O.L.D.

2024 Procaliber Alloy
6
Specications
Chain line/Chain ring
Chain line Max chain ring
52 mm 30T
55 mm 34T
Rear brake mount
Minimum: 160 mm
Maximum: 180 mm with adapter
Rear O.L.D.
148 mm
Maximum tyre size
29" x 2.4"
Notice: Measurements of actual tyres may vary. Always
verify that there is sufcient clearance between the tyre
and the frame. Improper tyre size could damage the
bicycle frame. Trek recommends 6mm clearance above
and on both sides of the tyre.
Bottom bracket
BSA 73
Fork
Travel
Sag
Axle to Crown
Frame size Axle to Race (mm) Travel
S, M, ML,
L, XL
Recommended 520 120
Maximum 540 130
Seat post
WARNING
Always follow the seat post manufacturer’s minimum
insertion recommendation. Failure to follow the recom-
mendation could cause damage to the seat post and
result in injury to the rider.
1
3
2
Minimum insertion: Refer to seat post manufacturer.
1
Maximum insertion
Small: 210 mm
Medium: 200 mm
Medium/Large: 230 mm
Large: 250 mm
Extra large: 280mm
2
Seat tube inside diameter: 31.6 mm
3
Seat tube post-clamp outer diameter: 36.2 mm