Need help?Do you have a question about the Trek MARLIN+ 6 and is the answer not in the manual?
General| Seatpost | Bontrager alloy, 31.6mm, 12mm offset |
|---|---|
| Frame | Alpha Silver Aluminum, 135x5mm QR |
| Fork | SR Suntour XCM 32, coil spring, preload, 100mm QR |
| Brakes | Tektro HD-M275 hydraulic disc |
| Wheels | Bontrager Connection, double-wall, 32-hole, 20mm width |
| Saddle | Bontrager |
| Handlebar | Bontrager alloy, 31.8mm |
| Stem | Bontrager alloy, 31.8mm, Blendr compatible, 7-degree |
Warning about the consequences of overtightening or undertightening hardware.
Caution regarding cleaning and re-applying threadlocker to reused fasteners.
Details the installation of the rear axle, including components, torque, and notices.
Illustrates the routing of brake hoses and shift housing through the frame.
Guides the routing of the seat post dropper housing through the frame and under the motor.
Details the routing and installation of the speed sensor components, including torque specs.
Shows the routing paths for the battery cable and remote control cable within the frame.
Instructions for installing the chainstay guard, including cleaning and alignment.
Details on mounting the downtube guard, including fastener specifications.
Steps for attaching the motor access cover, noting fastener length limits.
Procedure for installing the charge port cover, including fastener torque.
Steps for installing the motor guard, ensuring proper seal positioning and fastener alignment.
Details on installing the motor mount bracket and associated fasteners.
Instructions on how to lower the motor for access to routing and battery connections.
Lists fasteners (M5x12, M5x14) and washers for battery installation.
Provides Bosch part numbers for the horizontal fixed mount battery.
Step-by-step guide for safely removing the battery from the frame.
Detailed instructions for correctly installing the battery into the frame.
Installation details for the front mudguard on 27.5 inch wheels.
Installation details for the front mudguard on 29 inch wheels.
Instructions for mounting the rear rack on a 29 inch wheel bicycle.
Procedure for installing the rear mudguard on a 29 inch wheel bicycle.
Instructions for mounting the rear rack on a 27.5 inch wheel bicycle.
Procedure for installing the rear mudguard on a 27.5 inch wheel bicycle.
Guides for routing the rear light cable through the rear mudguard.
Details on routing the rear light cable through the bicycle chainstay.
Information regarding front light installation and routing options.
Details chain line, chain ring limits, and rear brake mount compatibility.
Covers OLD, maximum tyre sizes, and frame clearance recommendations.
Covers minimum insertion, seat tube diameter, and clamp size.
Provides axle-to-crown and travel measurements for different frame sizes.
Identifies the compatible kickstand part number.
To Next Page