Need help?Do you have a question about the Trek Madone 2016 and is the answer not in the manual?
General| Wheelset | Bontrager Race |
|---|---|
| Fork | Madone full carbon |
| Tire Size | 700c |
| Crankset | Shimano 105, 50/34 (compact) |
| Cassette | Shimano Ultegra, 11-28, 11 speed |
| Handlebar | Bontrager Race VR-C |
| Frameset | Madone KVF (Kammtail Virtual Foil) |
Guide for routing the front derailleur cable housing through the handlebar.
Guide for routing the rear derailleur cable housing through the handlebar.
Guide for routing the rear brake cable housing through the handlebar.
Guide for routing the front brake cable housing through the handlebar.
Guide for routing the rear brake guide cable through the frame.
Steps for mounting brake and shifter levers onto the handlebar and routing cables.
Guide for routing the rear brake housing through the frame's top tube.
Steps to route cable housings through frame cutouts and headset.
Procedures for installing the bicycle fork into the frame.
Instructions for correctly cutting the fork's steerer tube to length.
Steps for connecting the front brake cable and attaching brake arms.
Guide for fine-tuning the front brake's performance and alignment.
Attaching aerodynamic vector wings and the front brake cover.
Guide for routing the front derailleur Di2 wire through the handlebar.
Guide for routing the rear derailleur Di2 wire through the handlebar.
Steps for installing the Di2 electronic junction box.
Instructions for adjusting Di2 derailleur trim settings.
Guide for connecting the charger to the Di2 battery.
Procedure for increasing the handlebar height using spacers.
Procedure for decreasing the handlebar height using spacers.
Mounting brackets and accessories to the seatpost.
Mounting brackets and accessories to the handlebar.
Steps for safely disassembling the handlebar for transport.
Steps for reassembling the handlebar after transport.
Specifics on water bottle cage mounting and screw torque.
To Next Page
