TO LUBRICATE THE DECK
ATTENTION! To reduce the risk of electrical shock, always
remove the cable from the socket immediately after use and
before cleaning.
1 - Raise the belt from the edge of one of the sides and clean
the deck and belt by wiping a dry cloth over the deck and in
internal surface of the belt. Moving the belt backwards with the
foot clean the belt along its full length. Repeat on the other
side of the belt.
2 - Place the vial between the belt and the board and hold the
vial inclined.
3 - Apply a trickle of silicone from the front to the back of the
treadmill on each side. Try to reach the center of the deck
4 - Spread the silicone by running the treadmill at 1Km/h and
step delicately on the treadmill for some minutes to enable the
silicone to spread on the belt.
To Next Page
Loading...