Trekkrunner TR001 - Assembling Instructions

6
your back. Always use proper lifting techniques and/or seek assistance if
necessary.
Assembling Instructions
STEP 1
Open the carton, please confirm the product
accessories is complete
Accessories details:
1. Handrail decorative covers 2pcs
2. Lock screw M6X40 2pcs
3. Multi-purpose wrench 1pc
4. Lock nut M12X50 1pc
5. Spring locking pin 1pc
6. Magnet safety switch 1pc
7. 5 # Allen key 1pc
STEP 2
Connect the signal line and Insert the pillar which
have a signal line inside
into the right side base, and insert another pillar
into the left side base,
Then use M8X60 screw locking.