FOLDING FOR STORAGE
Please following the PIC 1,screws out the big
Screw which fixed the base and handrail,and follow
The PIC2,pull the “Spring Screws” which was fixed on
The handrail pole gently,and then release “Spring Screws”.
Belt Adjustment
Your Treadmill belt has been adjusted at the factory
but each user has a tendency to be “Right” or “Left”
footed. If the belt moves to either side,It needs to be
adjusted.
There are two adjustment bolts at the rear of the
unit(see PIC.3).Tighten by half a turn the bolt on the
side towards which the belt has shifted and
correspondingly loosen the bolt on the other side.
To Next Page
Loading...