AIRSHIELD
-1-
Dear Customer
Thank you for purchasing this Trend product, we
hope you enjoy many years of creative and
productive use.
Please remember to return your guarantee card
within 28 days of purchase.
CONTENTS
INTRODUCTION & ACCESSORIES _______2
APPROVALS _________________________2
TECHNICAL SPECIFICATION ____________3
ITEMS ENCLOSED ____________________4
DESCRIPTION OF PARTS _____________4-5
SAFETY ____________________________6-7
AIRSHIELD SAFETY PRECAUTIONS _____8
BEFORE USE
– Battery Pack Charging _________________8
ASSEMBLY & ADJUSTMENT
– Battery Pack Removal & Replacement ____9
– Functional Test_______________________9
– Fitting Procedure___________________9-10
– Removal Procedure __________________10
OPERATION _________________________10
MAINTENANCE & CARE ____________11-12
STORAGE___________________________12
TRANSPORTATION ___________________12
REPLACEMENT OF SPARE PARTS
– Battery Pack & Safety Precautions ______12
– Pre-Filter & Main Filter ________________13
– Face Seal __________________________13
– Sweatband & Headband ______________14
– Visor Overlay _______________________14
– Fan-Motor Unit & Visor _______________15
ENVIRONMENTAL PROTECTION________16
GUARANTEE ________________________16
SPARE PARTS
– Spare Parts List _____________________16
– Spare Parts Diagram _________________IB
☎
If you require further technical
information or spare parts, please call
our technical support department on
01923 224681.
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
INTENDED USE
The Airshield is a lightweight Powered
Respirator intended for protection against all
solid dusts. This is combined with full eye and
face protection from impact and chemical liquid
splash. It is fitted with a 4 hour on-board battery.
INTRODUCTION
The Airshield is a lightweight Powered
Respirator intended for protection against all
solid dusts. This is combined with full eye and
face protection from impact and chemical liquid
splash.
The Airshield is powered by either one or two
rechargeable battery packs inside the respirator.
Air is filtered through the respirator to provide a
constant flow of clean air over the face. A soft
face seal ensures positive pressure is
maintained within the visor and prevents debris
or contaminated air entering the visor area. The
visor is mounted on a fully adjustable headband
providing a comfortable fit for most head sizes.
Typical use for the Airshield Respirator is the
protection of individuals in Agriculture,
Engineering, Pottery, Insulation, Woodworking,
Dental Laboratories, Aerospace and other places
where dust is present. All respirators must be
used in atmospheres containing sufficient
oxygen to support life (usually 17% to 23% by
volume).
All parts, including filters and accessories are
easily changed without the use of special tools
and come packed for immediate use.
Read this manual before using the Airshield. It
must be fitted and used in accordance with this
manual to obtain the design performance. Use
as part of your maintenance programme.
MANU-AIR v5.0 16/5/05 11:24 am Page 1
To Next Page
Loading...
