AIRSHIELD
-2-
APPROVALS
Type approved according to European
Directive 89/686/EEC by:
Inspec Certification
Upper Wingbury Courtyard
Wingrave
Aylesbury
England
NP22 4LW
Notified Body No. 0194
Visor (eye protection) approvals EN 166.
Airshield manufactured by:
Trend Machinery & Cutting Tools Ltd
Odhams Trading Estate St Albans Road
Watford
England
WD24 7TR
The visor (reference WP-AIR/07) when fitted to
the respirator gives protection as detailed
below:-
The visor is marked:-
TREND 2 F CE0194
Number “2” is optical class 2 - is the permissible
tolerance for refractive power (EN166).
Letter “F” is the “low energy impact” relating to
the protection against high speed particles
(EN166).
Note that contact of the visor with your skin will
not cause allergic reactions under normal
conditions. It is unlikely that any contact will
occur in normal conditions of use.
The frame is marked:-
TREND EN166:1995 34-F
EN166:1995 is the harmonised European
Standard Number.
Number “3” is protection against droplets and
splashes or liquids.
Number “4” is protection against large dust
particles.
Letter “-F” is the symbol for resistance to high
speed particles.
IMPORTANT!
Visor ref. WP-AIR/07 must only be used with the
Trend Airshield.
ACCESSORIES
AIR/1 THP2 filter packs (packed 3)
AIR/10 THP2 filter packs (packed 1)
AIR/2 Pre-filter (packed 3)
AIR/3C Visor overlay - clear (packed 10)
AIR/3G Visor overlay - green anti-glare
(packed 10)
AIR/4 4 hour battery
AIR/5/UK 230v charger (UK)
AIR/5/EURO 220v charger (Euro)
AIR/5/ANZ 230v charger (Australia & New
Zealand)
AIR/WIPE Visor wipes
AIR/WSP Woodturners spare pack
comprises: 1 x THP-2 filter,
3 x pre-filter, 10 x visor overlay &
1 x face seal
(see catalogue)
AIR/BCP/UK Battery and charger pack 230v (UK)
Comprises: 1x AIR/4 &
1x AIR/5/UK
Not to be used if the contaminate is
potentially explosive or highly
flammable.
IMPORTANT!
Please read the operating instructions
carefully and keep them together with
your Airshield Respirator.
Before use fully charge the battery for
24 hours.
IMPORTANT!
IMPORTANT!
MANU-AIR v5.0 16/5/05 11:24 am Page 2
To Next Page
Loading...
