TRENDnet TC-NT2 - Product Setup and Basic Testing; Install the battery; RJ-11;RJ-45 Cable Test

E N G LIS H
Install the battery
1. Slide the cover off the TC-NT2 transmitter.
2. Connect and insert the battery.
3. Slide the cover back on to the TC-NT2 transmitter.
RJ-11/RJ-45 Cable Test
1. Connect one end of an RJ-11 or RJ-45 cable to the remote port on the TC-NT2
transmitter. Connect the other end of the RJ-11 / RJ-45 cable to the loopback
port on the TC-NT2 transmitter.
2. Switch the power button to the “On” position.
3. Press the auto (automatic) or test (manual) button.
90 BUS
hM.III1.Mk IIIIIIIIIIIIII
1
All manuals and user guides at all-guides.com