TRENDnet TEW-432BRP - Wireless Router Quick Installation Guide

English
6
7. If you want to assign your router to a different network segment, then change
the LAN IP Address and Subnet Mask. Make sure that the Range Start
and Range End IP addresses match your network segment. Otherwise,
click Next.
8. Select your Connection Type from the pull down menu, (Obtain IP
automatically, Fixed IP address, PPPoE, or PPTP) and proceed to the
appropriate subset of instructions below.
9. Select Obtain IP automatically (DHCP client) as the Connection Type and
click Next.
10. Go to step 19.
Obtain IP automatically (DHCP client)

TRENDnet TEW-432BRP - Wireless Router Specifications

General

Brand	TRENDnet
Model	TEW-432BRP - Wireless Router
Category	Wireless Router
Language	English