EasyManua.ls Logo

TRENDnet TEW-718BRM - User Manual

TRENDnet TEW-718BRM
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRENDnet Users Guide
Cover Page

Table of Contents

Other manuals for TRENDnet TEW-718BRM

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-718BRM and is the answer not in the manual?

Summary

Product Hardware Features

Basic Router Setup

Router Installation

Hardware Installation

Setup Wizard

Internet Settings

Details options for configuring the internet connection type, such as Ethernet over ATM or PPP.

Determine Connection Method Select

Explains the process of auto-detecting or manually selecting connection method settings for ADSL.

Wireless Settings

Covers setting the wireless network name (SSID) and security mode for enhanced network protection.

Connect additional wired devices to your network

Wireless Networking and Security

How to choose the type of security for your wireless network

Discusses different wireless security types (WEP, WPA, WPA2) and their strengths for protecting the network.

Secure your wireless network

Selecting WPA-PSK, WPA-PSK; WPA2-PSK, or WPA2-PSK

Connect wireless devices using WPS

Recommended Hardware Push Button (PBC) Method

Describes using the physical WPS button on the router and client device to establish a wireless connection.

WI-FI PROTECTED SETUP

Basic wireless settings

Steps to improve wireless connectivity

Advanced wireless settings

Wireless Operation Modes

AP Router Mode

Explains the default mode where the router functions as both an access point and a router for network and internet access.

AP Only Mode

Universal Repeater

Access Control Filters

MAC address filters

Details how to allow or deny network access based on device MAC addresses.

Domain;URL Filters

Packet Outbound;Inbound Filter

Advanced Router Setup

Change your router login password

Manually configure your Internet connection

Clone a MAC address

Set up the DHCP server on your router

DHCP SERVER

Set up DHCP reservation

Additional Security Settings

Open a device on your network to the Internet

Virtual Server

Prioritize traffic using QoS (Quality of Service)

Setup IPv6 on your router

Router Maintenance & Monitoring

Reset your router to factory defaults

Explains how to reset the router to its factory default settings using the reset button or management page.

Backup and restore your router configuration settings

Upgrade your router firmware

Restart your router

Technical Specifications

Summary

Product Hardware Features

Basic Router Setup

Router Installation

Hardware Installation

Setup Wizard

Internet Settings

Details options for configuring the internet connection type, such as Ethernet over ATM or PPP.

Determine Connection Method Select

Explains the process of auto-detecting or manually selecting connection method settings for ADSL.

Wireless Settings

Covers setting the wireless network name (SSID) and security mode for enhanced network protection.

Connect additional wired devices to your network

Wireless Networking and Security

How to choose the type of security for your wireless network

Discusses different wireless security types (WEP, WPA, WPA2) and their strengths for protecting the network.

Secure your wireless network

Selecting WPA-PSK, WPA-PSK; WPA2-PSK, or WPA2-PSK

Connect wireless devices using WPS

Recommended Hardware Push Button (PBC) Method

Describes using the physical WPS button on the router and client device to establish a wireless connection.

WI-FI PROTECTED SETUP

Basic wireless settings

Steps to improve wireless connectivity

Advanced wireless settings

Wireless Operation Modes

AP Router Mode

Explains the default mode where the router functions as both an access point and a router for network and internet access.

AP Only Mode

Universal Repeater

Access Control Filters

MAC address filters

Details how to allow or deny network access based on device MAC addresses.

Domain;URL Filters

Packet Outbound;Inbound Filter

Advanced Router Setup

Change your router login password

Manually configure your Internet connection

Clone a MAC address

Set up the DHCP server on your router

DHCP SERVER

Set up DHCP reservation

Additional Security Settings

Open a device on your network to the Internet

Virtual Server

Prioritize traffic using QoS (Quality of Service)

Setup IPv6 on your router

Router Maintenance & Monitoring

Reset your router to factory defaults

Explains how to reset the router to its factory default settings using the reset button or management page.

Backup and restore your router configuration settings

Upgrade your router firmware

Restart your router

Technical Specifications

TRENDnet TEW-718BRM Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Modulation16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)150 Mbit/s
Rack mountingNo
Frequency band2.4 GHz
Frequency range2.4 - 2.4835 GHz
WLAN data transfer rates supported11, 54, 150 Mbit/s
Ethernet LAN (RJ-45) ports4
DSL specificationG.992.1, G.992.2, G.992.3, G.992.5
DHCP client-
Routing protocolsIGRP, IP, RIP-1, RIP-2
Security algorithms128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK
Antennas quantity1
CertificationCE, FCC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)5 W
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Product colorBlack
LED indicatorsDSL, LAN, WLAN
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width118 mm
Height33 mm
Weight221 g

Related product manuals