© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
24
Wireless Operation Modes
The modem router supports multiple wireless operation modes for different application
purposes. This section will explain each operation mode, the function, and how it is
used.
AP Router Mode
Setup > Wireless Settings
AP (Access Point) Router Mode the default wireless operation mode (recommended
mode) of your modem router. This mode allows the modem router to function as both a
wireless access point and router at the same time. In this mode, wireless client devices
connect to your network, access local network resources (Ex. Shared files/folders on
computer or device connected wired or wireless), and the Internet. All client devices
connected either wired or wireless can all access share and access the Internet at the
same time. When operating in this mode, basic wireless settings such as SSID and
wireless security along with Internet access would need to be configured as covered in
the Initial Setup Wizard on page 8.
1. Log into your router management page (see “Access your router management page”
on page 35
).
2. Click on Setup, and click on Wireless Settings.
3. Click the Wireless Operation Mode drop-down list and select AP Router Mode.
4. To save changes, click Apply.
Note: If you would like to discard the changes, click Undo before you click Apply.
Note: Please refer to page 18 on configuring your wireless settings and page 12
on
configuring your wireless security settings.
5. If prompted to reboot in order to apply changes, click Reboot at the bottom of the
page and click OK or Continue to reboot the device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
