TRENDnet TEW-718BRM User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
47
Prioritize traffic using QoS (Quality of Service)
Configuration > Advanced Setting > Quality of Service
You may want to prioritize outbound traffic for specific computers or devices on your
network to have higher priority.
1. Log into your router management page (see “Access your router management page”
on page 35
).
2. Click on Advanced, and click on Quality of Service.
3. Click the QoS drop-down list and select the Enable option.
4. The WAN Interface allows you to select a specific PVC to assign QoS if using ADSL
WAN and multiple PVCs with your ISP. The default setting is PVC0.
5. Enter the approximated upload (Upstream) and download (Downstream) speeds in
kbps provided by your ISP.
6. Choose the QoS Mode.
• Smart-QoS (Recommended) – This mode allows for easy QoS configuration
based on simply selecting pre-defined application categories. You can manually
assign a percentage to assign for each category or using the Flexible Bandwidth
Management feature, the modem router can automatically determine the
traffic priority based on the selected categories to prioritize.
• User-Defined QoS – This QoS mode is recommended for advanced users only is
provided only to allow the option to provide more granular control of the
modem router QoS settings.
To configure Smart-QoS:
1. For the QoS Mode, select Smart-QoS.
2. Check the categories you would like to assign priority and enter the percentage.
OR enable Flexible Bandwidth Management and check which categories you would
like to prioritize.
3. To save changes, click Apply.

TRENDnet TEW-718BRM Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Modulation	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	150 Mbit/s
Rack mounting	No
Frequency band	2.4 GHz
Frequency range	2.4 - 2.4835 GHz
WLAN data transfer rates supported	11, 54, 150 Mbit/s
Ethernet LAN (RJ-45) ports	4
DSL specification	G.992.1, G.992.2, G.992.3, G.992.5
DHCP client	-
Routing protocols	IGRP, IP, RIP-1, RIP-2
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK
Antennas quantity	1
Certification	CE, FCC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	5 W
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Product color	Black
LED indicators	DSL, LAN, WLAN

Weight and Dimensions

Depth	189 mm
Width	118 mm
Height	33 mm
Weight	221 g