TRENDnet TEW-718BRM User Manual

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
57
Check the router system information
Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, and router MAC address information.
1. Log into your router management page (see “Access your router management page”
on page 35
).
2. Click on Status.
3. Review the device information.
IPv4 System Status WAN (Internet) Information
• MAC Address – The current MAC address used by your router’s ADSL WAN port
or interface configuration.
• Connection Type – The current connection type configured ADSL or Ethernet.
• IP Address – The current IPv4 address assigned to your router WAN port or
interface configuration.
• Subnet Mask - The current IPv4 subnet mask assigned to your router WAN port
or interface configuration.
• Gateway – The current gateway IPv4 address assigned to your router WAN
port or interface configuration.
• Domain Name Server – The current DNS address(es) assigned to your router
port or interface configuration.
• Connection Time – Displays the current WAN (Internet) connection status and
the duration that the connection has been established. When using DHCP
Client (or Dynamic IP address) Internet connection type, you will provide the
option to Release and Renew your IP address settings.
Other Internet connection types such as PPPoE will provide the option to
Connect and Disconnect.
IPv6 System Status WAN (Internet) Information
• WAN Link-Local Address – When IPv6 is enabled, displays the current WAN
Link Local Address used by your router’s ADSL WAN port or interface
configuration.
• Global IPv6 Address – When IPv6 is enabled, displays the current Global IPv6
Address used by your router.
• LAN IPv6 Link-Local Address – When IPv6 is enabled, displays the current LAN
IPv6 Link-Local Address used by your router’s LAN port or interface
configuration.
• Link Status – When IPv6 is enabled, displays the IPv6 link status.

TRENDnet TEW-718BRM Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1p, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Modulation	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity	13 channels
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	150 Mbit/s
Rack mounting	No
Frequency band	2.4 GHz
Frequency range	2.4 - 2.4835 GHz
WLAN data transfer rates supported	11, 54, 150 Mbit/s
Ethernet LAN (RJ-45) ports	4
DSL specification	G.992.1, G.992.2, G.992.3, G.992.5
DHCP client	-
Routing protocols	IGRP, IP, RIP-1, RIP-2
Security algorithms	128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK
Antennas quantity	1
Certification	CE, FCC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	5 W
Storage temperature (T-T)	-10 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Product color	Black
LED indicators	DSL, LAN, WLAN

Weight and Dimensions

Depth	189 mm
Width	118 mm
Height	33 mm
Weight	221 g