© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
31
Domain/URL Filters
Advanced > Firewall > URL Filter
You may want to allow or block computers or devices on your network access to specific
websites (e.g. www.trendnet.com
, etc.), also called domains or URLs (Uniform Resource
Locators).
1. Log into your router management page (see “Access your router management page”
on page 35
).
2. Click on Advanced, click on Firewall, and click on URL Filter.
3. Next to URL Filter, check the Enable option to enable URL filtering.
4. In the entry list, choose an entry and under URL, enter the URL or domain name (e.g.
www.trendnet.com
) you would like to block access.
• Drop – Checking the option will drop or block access to the specific URL or
domain.
• Log – Checking the option will log the access requests to the specific URL or
domain in the router log. Note: Checking the Log option only will not block
access. You will need to check the Drop option to block access.
• Enable – Check the enable option to enable the URL/domain filter.
5. Click Apply at the bottom of the page to save the changes.
Note: If you would like to discard the changes, click Undo before you click Apply.
Additional URL filter options:
Log DNS Query – Checking the Enable optin will log all URL or domain queries in the
router log.
Privilege IP Addresses Range – Enter the IP address range (use last IP address number
only such as 192.168.10.101-192.168.10.110) to exclude from Domain/URL filtering. IP
addresses included in the range will not be blocked from accessing any of the URLs
specified.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
