© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
15
Selecting WPA, WPA / WPA2, or WPA2:
If selecting WPA, WPA / WPA2, or WPA2 (Wi-Fi Protected Access Extensible
Authentication Protocol) please review the settings to configure and click Apply to save
the changes.
EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In
User Service or RADIUS.
Select the Encryption Type
o When selecting WPA security, it is recommended to use TKIP.
o When selecting WPA / WPA2 security, it is recommended to use AES.
o When selecting WPA2 security, it is recommended to use AES.
o RADIUS Server IP – Enter the IP address of the RADIUS server. (e.g.
192.168.10.250)
o RADIUS Port – Enter the port your RADIUS server is configured to use
for RADIUS authentication.
Note: It is recommended to use port 1812.
o RADIUS Shared Key – Enter the shared key (or shared secret) used to
authorize your router with your RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
• Gaming Consoles
• Internet enabled TVs
• Network media players
• Smart Phones
• Wireless Laptop computers
• Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
See the “Appendix” on page 65
for general information on connecting to a wireless
network.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
