© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
2
• Smart Quality of Service (QoS) controls to allocate bandwidth to: Gaming, Chat,
VoIP, P2P, Video, and Web Access
• Advance Firewall protection with Network Address Translation (NAT), Stateful
Packet Inspection (SPI), and WAN stealth mode
• Supports Internet Group Multicast Protocol IGMPv1/2/3 proxy and snooping
for multicast applications
• Access Control: Virtual Servers, MAC / IP Packet Filters, URL / Keyword Filters,
Demilitarized Zone (DMZ) host, PPTP / L2TP / IPsec VPN pass through
• Supports static and dynamic RIP v1/2 routing
• Dynamic DNS support
• Universal Plug and Play (UPnP) for auto discovery and support for device
configuration of Internet applications
• Local / remote management via Web browser, upgrade firmware, and backup /
restore configuration
• Supports TR069 remote management (CPE and ACS support)
• Device monitoring using modem and router logs, email alerts, and SNMP v1/2c
support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Product Hardware Features
Rear View
• Power Port – Connect the included power adapter from your modem router
power port and to an available power outlet.
Note: Use only the adapter that came with your router.
• LAN Ports – Connect Network cables (also called network cables) from your
modem router LAN ports to your wired network devices.
• ADSL WAN Port (RJ-11 telephone port) –Connect an RJ-11 telephone cable
from your modem router ADSL WAN port to your telephone jack/DSL line.
• Antenna – The antenna broadcast wireless network signals.
ADSL