PYCCKMM ESPA ftol DEUTSCH 1 FRANQAIS ENGLISH
1. Before You Start
Package Contents
Minimum Requirements
• TEW-715APO • Computer with an Ethernet port and Web
• CD-ROM (User's Guide)
Browser
• Multi-Language Quick Installation Guide
• A network switch or router with an available
• PoE injector
network LAN port
• Power cord
• 2 x RJ-45 network cables
• Pole mounting clamp
• Grounding wire
Note: The TEW-715APO does not support IEEE 802.3af. You must use the proprietary Power over
Ethernet injector that is supplied with the TEW-715APO.
2. Hardware Configuration
Note:
1. The default IP address of the TEW-715APO is 192.168.10.100. To configure the TEW-715APO,
your network adapter must have an IP address within the 192.168.10.x subnet (e.g.
192.168.10.50). Please refer to the Appendix in the User's Guide for more information.
2. Disable any anti-virus and firewall programs before configuring the access point.
1
To Next Page
Loading...
Need help?
General
