ENGLISHFRANÇAISDEUTSCH
ESPAÑOLРORTUGUÊS
1
1. Before You Start
Package Contents
Ÿ 1 x TEW-WLC100 wireless LAN controller
Ÿ 2 x TEW-755AP N300 PoE access points or TEW-821DAP AC1200 dual band PoE access
points
Ÿ 2 x TPE-113GI 802.3af Gigabit PoE injectors
Ÿ 2 x Network cables (1.5 m / 5 ft.)
Ÿ TEW-WLC100 power adapter (12V DC, 1A)
Ÿ Quick Installation Guide
Ÿ CD-ROM (User's Guide)
Ÿ Controller rack mount kit
Ÿ Access point mounting plates
Minimum Requirements
Ÿ Computer with an Ethernet port and web browser
Ÿ Network cable for computer connection to controller
Ÿ Network cables for access point connections to PoE injectors
Important Note: Make sure your existing network is using a DHCP server to distribute IP
addresses to the access points. By default, TRENDnet access points listed below will obtain an IP
address automatically through DHCP or otherwise default back to 192.168.10.100 /
255.255.255.0 if a DHCP server is not available on your network. Each access point must be
assigned a unique IP address on the same network. The wireless controller and access points
must be connected to the same IP subnet on your network (e.g. 192.168.10.x / 255.255.255.0).
Optional Equipment
Ÿ EIA standard 19” rack
Ÿ Power drill/drill bits and Phillips bit or screwdriver for mounting
To Next Page
Loading...
Need help?
General
