EasyManua.ls Logo

TRENDnet TEW-755AP2KAC - User Manual

TRENDnet TEW-755AP2KAC
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TRENDnet Users Guide
Cover Page

Table of Contents

Other manuals for TRENDnet TEW-755AP2KAC

Question and Answer IconNeed help?

Do you have a question about the TRENDnet TEW-755AP2KAC and is the answer not in the manual?

TRENDnet TEW-755AP2KAC Specifications

General IconGeneral
Frequency Bands2.4 GHz, 5 GHz
Device TypeAccess Point
Wireless Standards802.11ac, 802.11n, 802.11g, 802.11a, 802.11b
Ethernet Ports1 x Gigabit Ethernet
Power over Ethernet (PoE)Yes (802.3af)
SecurityWEP, WPA/WPA2
Operating Temperature0 – 40 °C (32 – 104 °F)
Storage Temperature-4°F to 158°F (-20°C to 70°C)
Operating Humidity90% or less (non-condensing)
Storage Humidity90% or less (non-condensing)

Summary

Product Overview

Product Hardware Features

Basic Installation & Setup

Initial Controller Setup

Guides through the initial configuration steps for the wireless controller's IP address and login.

Connect Wireless Access Points

Instructions on physically connecting access points to the controller via PoE injectors.

Initial Wireless Setup

Steps to access the controller's management interface and configure wireless settings.

Controller Management

Access Controller Management Interface

Guide on how to access the controller's web-based management interface.

Change Controller Admin Password

Steps to modify the administrator's password for enhanced security.

Change Controller LAN IP Address

Instructions for modifying the controller's IP address to match the network subnet.

Upgrade Controller Firmware

Explains how to download and install firmware updates for the controller.

Backup and Restore Controller Configuration

Procedures for backing up and restoring the controller's configuration settings.

Reset Controller to Factory Defaults

Steps to reset the controller to its original factory default settings.

Access Point Management and Configuration

Discover and Add Access Points

Process for discovering and adding compatible access points to the controller.

Configure Managed Access Points

Detailed steps for configuring access points managed by the controller.

Wireless Groups and Profiles

Monitoring Access Points and Clients

Related product manuals