© Copyright 2015 TRENDnet. All Rights Reserved.
IPv6 Settings
Advanced > Setup > IPv6 Settings
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
Integrated IPsec – Better Security
Integrated Quality of Service (QoS) – Lower latency for real-time applications
Higher Efficiency of Routing – Less transmission overhead and smaller routing
tables
Easier configuration of addressing
Note: In order to use IPv6 Internet connection settings, it is required that your ISP
provide you with the IPv6 service. Please contact your ISP for availability and more
information about the IPv6 service.
1. Log into your router management page (see “Access your router management page”
on page 9).
2. Click on Advanced and click on Setup, then click on IPv6 Settings.
.
3. Review the IPv6 Internet Connection settings and enter information settings specified
by your ISP. Click Apply to save changes.
Note: Please contact your ISP for IPv6 service availability.
Select the IPv6 connection type provided by your ISP.
Static IPv6
Auto-configuration (SLAAC/DHCPv6)
PPPoE
6to4
Link-Local Only
To Next Page