TRENDnet TI-BG62i User Manual

© Copyright 2023 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TI-BG62i
2
Product Overview
TI-BG62i
Front View
• PoE++ Ports 1-4 – Connect either network PoE++ or non-PoE devices.
• SFP Slot 5-6 – Designed to operate at Gigabit or 100Mbps speeds.
• Reset Button – Push the button for 5-10 seconds and release to reset.
• Grounding point/screw – The switch chassis can also be connected to a known
ground point for additional safety and protection. (grounding wire not
included)
Top View
*Please note power supply is sold separately*
**Supported power supplies: TI-S12024 (120W), TI-S24048 (240W), TI-S48048 (480W).
Lower wattage power supplies may be used but may result in decreased PoE power
budget**
LED Indicators
PoE+ + Gigabit
RJ-45 ports
10/100/1000
Mbps per port
LED indicator
LINK/ACT per
port LED
indicator
IP30 Rated
Housing
DIP Switches
Reboot Button
Ground point
6-pin terminal
block (PWR,
RPS, ALM)
DIP switch
definition
PoE LEDs
SFP Slots
4-pin terminal
block

TRENDnet TI-BG62i Specifications

General

Brand	TRENDnet
Model	TI-BG62i
Category	Network Router
Language	English