TRENDnet TI-G102i - User Manual

Overview of the TRENDnet Industrial Gigabit L2 Managed PoE+ Rackmount Switch Series.

Instructions for mounting the switch onto a DIN-rail.

How to connect power supplies to the switch terminal block.

Guide on how to install SFP modules and connect optical cables.

Instructions for connecting to the switch via CLI using Telnet or SSH.

Steps to access the switch's web-based management interface.

Configuration and management of MAC addresses and tables.

Manual configuration of static MAC address entries.

Configuration for mirroring network traffic from selected ports.

Quality of Service settings for prioritizing network traffic.

Configuration of bandwidth limits and storm control.

How to enable and configure IGMP snooping globally and per VLAN.

Configuration settings for PoE ports, including mode, state, and priority.

Restricts IP traffic on untrusted ports based on DHCP snooping binding database.

Filters untrusted DHCP messages and builds a binding database for security.

Validates ARP packets by performing IP to MAC address binding inspection.

Configures rules to filter packets based on MAC, IP, port, and protocol criteria.

Port-based network access control for device authentication.

Steps to resolve issues accessing the switch management page via browser.

How to resolve issues when the switch IP differs from the network subnet.