Need help?Do you have a question about the TRENDnet TI-G50 and is the answer not in the manual?
General| Stackable | - |
|---|---|
| Certification | FCC CE |
| Rack mounting | No |
| Housing material | Metal |
| International Protection (IP) code | IP30 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| Full duplex | Yes |
| Networking standards | IEEE 802.3u, IEEE 802.3x, IEEE 802.3, IEEE 802.3ab |
| Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
| MAC address table | 8000 entries |
| Operating temperature (T-T) | -40 - 75 °C |
| Power consumption (max) | 2.76 W |
| Mean time between failures (MTBF) | 510304 h |
| Power requirements | 12 - 56 VDC / 18 - 36 VAC |
| Harmonized System (HS) code | 85176990 |
| Switch type | Unmanaged |
Weight and Dimensions| Depth | 82 mm |
|---|---|
| Width | 113 mm |
| Height | 31 mm |
| Weight | 168 g |
Lists all items included in the product box for user verification.
Specifies the essential prerequisites for operating the device.
Illustrates the typical network setup with cameras and the switch.
Detailed steps for securely mounting the switch onto a DIN-rail.
Step-by-step guide for affixing the switch to a wall surface.
Important safety notes regarding power connection and electrical wiring.
Connects the power adapter to the terminal block and the unit.
Connects network devices and confirms established connections via LEDs.
Details the product's model, name, and trade name.
Lists relevant safety, EMC standards, and EU directives.
Explains warranty against material and workmanship defects under normal use.
States adherence to FCC Rules Part 15 and its operational conditions.
Clarifies that this product is exclusively for PoE network connections.
Provides contact details for support and instructions for warranty registration.
To Next Page