TRENDnet TK-207K - Operation; Face-Panel Buttons; Hot-Key Command Sequence

Note: For PC switching, you can use the face-panel buttons of the KVM Switch,
a hot-key command sequence via keyboard, or the Client Switch Utility
(Windows only). For more detail on the Client Switch Utility, please consult the
Client Switch Utility manual on the CD-ROM.
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key
again. If you do not press a key within 2 seconds, the switch will exit hot-key
mode.
3. Operation
English
4
Face-Panel Buttons
Hot-Key Command Sequence
Press the corresponding face-panel
button to select your PC.
Universal Hot-Key Command
Command
Hot-Keys
Description
Select PC
ScrLk ScrLk
+
Select the active PC channel,
PC Channel 1 or PC Channel 2.
All manuals and user guides at all-guides.com
all-guides.com