Need help?Do you have a question about the TRENDnet TEG-S80G and is the answer not in the manual?
Connect the power adapter to the switch and then to a power outlet.
Connect a network cable from the computer to an Ethernet port on the switch.
Connect the power adapter to the switch and then to a power outlet.
Connect a network cable from the computer to an Ethernet port on the switch.
General| MAC address table | 4000 entries |
|---|---|
| Packet buffer memory | 0.128 MB |
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| Full duplex | Yes |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x |
| Dimensions (WxDxH) | 171 x 98 x 28 mm |
| Networking features | Gigabit Ethernet |
| Connectivity technology | Wired |
| Switch type | Unmanaged |
| Basic switching RJ-45 Ethernet ports quantity | 8 |
| Stackable | No |
| Certification | FCC, CE |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 90 % |
| Harmonized System (HS) code | 85176990 |
| Switching protocols | CSMA/CD, Star |
Weight and Dimensions| Weight | 450 g |
|---|
To Next Page
