Ethernet Adapter Driver Installation
This section describes how to install the software driver for the USB hub’s Ethernet
adapter.
Note: Using TU3-ETGH3/TUC-ETGH3 with a macOS computer or laptop does not require
driver installation. The USB hub is plug and play on Mac operating systems.
Windows® OS Installation
Supported operating systems: Windows® 10, 8.1, 8
For any updates, please check the TRENDnet website www.trendnet.com.
1. Insert the included CD-ROM into your computer’s CD-ROM drive.
Note: If you do not have the included CD-ROM, you can download the drivers from
http://www.trendnet.com/support/.
Caution: DO NOT connect the Ethernet adapter to your computer before you install the
provided driver.
2. Click on the Install Driver button to begin installation.
Note: During the installation, you might see these warning message, please select Yes to
continue driver installation.
(Windows 10)
To Next Page
