Do you have a question about the TRENDnet TV-IP420P and is the answer not in the manual?
Type | IP security camera |
---|---|
PTZ control | Yes |
Certification | CE, FCC |
Number of languages | 5 |
Placement supported | Outdoor |
Connectivity technology | Wired |
Form factor | Dome |
Mounting type | Ceiling |
Product color | Silver |
Protection features | UV resistant |
International Protection (IP) code | IP66 |
Total megapixels | 3 MP |
Maximum resolution | 2048 x 1536 pixels |
Video formats supported | H.264, M-JPEG |
Supported graphics resolutions | 704 x 576, 2048 x 1536 (QXGA) |
Focus | Motorized/Manual |
Optical zoom | 4 x |
Number of lenses | - |
Focal length range | 2.8 - 12 mm |
Maximum aperture number | 2.7 |
Minimum aperture number | 1.6 |
Number of cameras | 1 |
Sensor type | CMOS |
Optical sensor size | 1/2.8 \ |
Pan range | 0 - 350 ° |
Pan speed | 60 °/sec |
Tilt angle range | 0 - 90 ° |
Camera shutter speed | 1 - 1/10000 s |
Minimum illumination | - lx |
Preset programs quantity | 256 |
Audio input channels | 2 channels |
Built-in HDD | No |
Compatible memory cards | SD |
Maximum memory card size | 128 GB |
Number of users | 32 user(s) |
Networking standards | IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3u |
Supported network protocols | IPv4, IPv6, UDP, TCP, IGMP, ICMP, ONVIF v2.2, DHCP, NTP, DNS, DDNS, SMTP, FTP, SNMP (v1, v2c, v3), CIFS / SMB, NFS, HTTP, HTTPS, PPPoE, UPnP, RTSP, RTP |
DC output current | 1 A |
DC output voltage | 12 |
Power source type | DC, PoE |
Power consumption (typical) | 8 W |
Interface | RJ-45 |
Operating temperature (T-T) | -30 - 65 °C |
Operating relative humidity (H-H) | 0 - 90 % |
Harmonized System (HS) code | 85258900 |
Width | 140 mm |
---|---|
Height | 107 mm |
Weight | 930 g |