TRENT CaterSense V2 User Manual

CaterSense the Intelligent answer
CS-INSTV2-0.01 Page 14 01-15
Model: CaterSense V2
2.02 System Set-up – CaterSense V2
Once the above has been carried out, the system is ready to be powered up.
Within the step-by-step sequence of set-up instructions the CaterSense unit will give you
feedback on the system via audible “beeps” and coloured LEDs.
Set-up sequence:
1) Activate "SETUP" mode on controller
2A) Manual speed control fan power monitoring set-up
OR
2B) Automatic speed control fan power monitoring set-up
OR
2C) Electronic speed control fan power monitoring set-up
3) CO2 monitoring alarm stages (if required)
4) Heater battery set-up (if required)
5) Demand extract air control set-up (if required)
The sequence detailed above MUST be followed to enable the CaterSense unit to program its
parameters. Ensure that the system is allowed to settle and become stable before moving on
to the next stage. DO NOT RUSH.

TRENT CaterSense V2 Specifications

General

Brand	TRENT
Model	CaterSense V2
Category	Controller
Language	English