Tresanti 1334060 - User Manual

Questions and Answers

W
walkersergioAug 10, 2025
What to do if Tresanti 1334060 displays E2 error?
- L
  Lori JacobsAug 10, 2025
  If your Tresanti Indoor Furnishing displays error code E2, it could be due to several reasons: * The top load might be too heavy. Try reducing the load to a maximum of 45.4 kg (100 lbs). Unplug the power cord for 5 minutes and then plug it in again. * The motor might be stuck. Inspect the motor and its shaft for any foreign materials or objects that could be causing an obstruction. * Try unplugging the power cord for 5 minutes and then plugging it in again.
B
Brenda ComptonAug 17, 2025
What to do if Tresanti 1334060 displays E1 error?
- M
  Marcus DaviesAug 17, 2025
  If your Tresanti Indoor Furnishing displays E1, it means the motor has overheated. To resolve this, unplug the power cord and plug it back in after 5 minutes.
E
emilymirandaAug 25, 2025
Why does my Tresanti Indoor Furnishing display E3?
- M
  Madeline HendersonAug 26, 2025
  If your Tresanti Indoor Furnishing displays error code E3, it indicates that the motor is not powered. To address this: * Unplug the unit. * Check for any loose electrical connections between the power cord and the adapter, and from the adapter to the motor. * Unplug the power cord for 5 minutes and then plug it in again.
N
Nathan JensenSep 2, 2025
What to do if Tresanti 1334060 Indoor Furnishing displays E4 error?
- R
  Rachel WhiteSep 2, 2025
  If your Tresanti Indoor Furnishing displays E4, it means the motor voltage is too low. Make sure the power adapter is the same as the one supplied with the desk, according to the specifications on page 4. You can also try unplugging the power cord for 5 minutes and then plugging it in again.