XR 8A30
English
CONTROLS
CHARGING
The speaker must be recharged when switched Off.
1. Using the supplied USB/ Type- C cable, connect the side with the Type-C to the socket
(10) of the speaker and the other end to the USB port of a PC or USB charger (5V
1A not included);
2. The indicator light, located near the socket, will light up in Red, when the charge is
complete it will switch Off.
BASIC OPERATION
To switch On the speaker, press and hold button (5) for 3 seconds.
Press the
M
button (7) to choose from:
- Bluetooth mode.
- Micro SD mode, if present a micro SD type memory in the slot (11) it will start playback
of the music automatically.
- USB Mode, if present a USB-type memory in the slot (9), the device will start playing
songs automatically.
VOLUME ADJUSTMENT
Press and hold the
-/
Volume
-
(3) button or
+/
Volume + (2) button to adjust the volume.
1. Holes for cord
2.
+
button,
Volume+/ Next track button
3.
-
button,
Volume -/ Previous Track
button
4.
button, light effect selection
5.
button, Power On/Off
6. Microphone
7.
M
button, MODE
8. AUX IN input
9. USB input
10. Type- C socket for charging.
11. MicroSD memory input
1 2 3 4
11
5 8 9 1076
To Next Page
Loading...
Need help?
General
