XR 8A30
English
BLUETOOTH OPERATION
PAIRING DEVICES
1. Place the speaker near the Bluetooth device to be paired;
2. Turn on the speaker and press the
M
button (7) until you hear a notification sound;
3. Follow the instructions of your device to search for the speaker;
4. Search and pair the speaker named “XR 8A30” and enter the PIN “0000” if requested;
5. Once paired, the device will emit a notification sound and it will be possible to play the
music.
Notes:
- The Bluetooth speaker only works with a connection at a time, the connection can not be
interrupted during normal operation.
- When the Bluetooth pairing with external devices fails, delete another Bluetooth device in
the list of connections, restart the Bluetooth speaker and search for the signal again.
COMMANDS IN BLUETOOTH MODE
- To start music playback, press button (5) or start it from your device;
- Press once the
+
button (2) to skip to the next track, press once the
-
button (3) to skip
to the previous track;
- Press
button (5) to pause, press it again to resume music playback;
In case of connection with a telephone, when a call is received, a sound warning will be heard.
- When you receive a call, press once button (5) to open the call and activate the
speaker phone feature, press again to end a call.
- Long press
button (5) to reject a call.
TWS OPERATION (TRUE WIRELESS STEREO)
This function allows you to pair 2 speakers (to be purchased separately) for stereo music
playback; This feature is only available in Bluetooth mode with compatible devices.
1. Turn Off the speaker function on your mobile or other bluetooth devices;
2. Turn On two speakers and choose bluetooth mode;
3. Press and hold the
M
button (7) of either speaker, a sound is heard confirming the TWS
function opened, after few seconds two speakers connected;
4. Using your device to search the pairing name “XR 8A30” and enter the PIN “0000” if
required, music is ready to play for the two units together after paired.
Note: In case of non-pairing between the 2 speakers, switch Off both devices and repeat
steps 1, 2 and 3.
OPERATION MICRO SD CARD/ USB MEMORY
1. Turn on the speaker;
2. Insert a micro SD card into the slot (11) holding the contacts facing upwards, or insert a
USB memory;
3. Playback will start automatically;
4. Press once the
+
button (2) to skip to the next track, press once the
-
button (3) to
skip to the previous track;
To Next Page
Loading...
Need help?
General
