18
PARTS LIST
All orders for repair parts must contain the following data.
1. Complete model number (located on nameplate).
2. Pump serial number (located on nameplate).
3. Description and part key number from the parts list.
The exploded views and accompanying parts list facilitate ordering repair parts from the factory. All
parts of the pump are exploded and keyed to the parts list.
KEY DESCRIPTION QTY
1 Casing 1
2 Impeller 1
6A Set Screw (Shaft) 4
6D Universal Stub Shaft-Threaded 1
6E Universal Stub Shaft-STD 1
11 Backplate 1
11B Backplate 1
11F Backplate Pin 2
11H Backplate (DG) 1
17 Follower 1
17A Machine Screw 4
17B O-ring 1
17C Lockwasher 4
17J SS Gland Ring (DG) 1
17K Bolt/Screw (DG) 4
17M Lockwasher (DG) 4**
24 Retainer (Impeller) 1
24A Castellated Nut (Impeller) 1
24B Cotter Pin (Impeller) 1
40 Deflector 1
71 Adapter 1
71A Adapter Pin 2
71B Adapter Mounting Screw 4
71C Adapter Plate 1
(See note next page)
71D Adapter Mounting Screw- 4
(Used only with #71C above)
75 Clamp Assembly Complete 1
* E Seal takes 2.
** Model 114/216/218/328 req. 1-#80P outboard
gasket
(
1
/16 " thick), and 1-#80R inboard gasket (
1
/8"
thick). Gaskets are not interchangeable.
Model 4410 req.
2-#80P gaskets (same size out/inboard). All
models req. 4-#17M lockwashers.
KEY DESCRIPTION QTY
80 Carbon Seal 1 or 2*
80A Cup 1
80B O-ring (Seal) 1 or 2*
80C Spring 1
80G Cup 2
80H Spring 1
80J Drive Collar 1
80K Set Screw 2
80L Drive Collar 1
80M Set Screw-Drive Collar 2
80N Seal Seat (DG) 1
80P PTFE Gaskets (DG) 1 or 2**
80R PTFE Gaskets (DG) 1**
83C Stuffing Box 1
83D Machine Screw 4
83E O-ring 1
90 Casing Gasket 1
127 Water Inlet Assembly 1
127A Lock Nut 1
131 Seal Guard Assembly 1
133 Washer (Impeller) 1
207 Adjustable Leg 4
209 Adjustable Leg Bracket 2
209A Set Screw (Square Hd.) 4
209B Bracket Mounting Screw 4
209C Washer (Leg Assembly) 4
To Next Page
Loading...
