T R I - T R O N I C S
Multi-Dog Models
MULTI-DOG MODELS
On two- and three-dog models, the toggle switch next to the
transmitter buttons selects one collar to be “active.” The
active collar is the one that will apply stimulation, make
the tone, or operate the Beeper when the appropriate
transmitter buttons are pressed. The colored spot next
to the transmitter toggle switch indicates which collar
will be active. The chart on pages 4 and 5 shows the
strap colors for the multi-dog models.
When installing collar straps, be sure to install the correct
color strap on each receiver (page 7). Use the strap that
matches the colored dot on the receiver.
Page 20 Remote Trainer
To Next Page
Loading...
