Triad InRoom Bronze PowerSub

Need help?

Do you have a question about the Triad InRoom Bronze PowerSub and is the answer not in the manual?

Summary

Triad PowerSub Amplifier Features and Adjustments

Input Level

Controls the gain of the subwoofer amplifier when using the left and right inputs.

Lowpass A; Lowpass B Filters

Independent 12dB per octave low pass filters, combined for 24dB roll-off.

Phase Control

Adds up to 180 degrees of phase lag to improve subwoofer to main speaker blending.

Left & Right Inputs (20 Hz)

Inputs for increased frequency response below 35Hz and use of level/high pass outputs.

Theater Input (35 Hz)

Fixed input level input for maximizing output above 35Hz; Input Level control is inactive.

High Pass Outputs

Provides signal for main speakers with a fixed 12dB per octave high pass filter at 100 Hz.

Speaker to Line Level Converter

Converts speaker level to line level for PowerSub's line level inputs.

New Construction Installation Guide

Step One: Mark Installation Area

Locate and mark the speaker placement area, ensuring clearance from obstructions.

Step Two: Attach Bracket

Align bracket with marks and attach securely to studs, checking for squareness.

Step Three: Connect Wiring

Attach the wires from the source to the speaker terminals.

Triad PowerSub Amplifier Wiring for Two Channel Stereo

Triad PowerSub Amplifier Wiring for Multi Channel Surround

InWall PowerSub Speaker Wiring Diagram

Volume Control Wiring Diagram with Satellites and PowerSub

Product Specifications Overview

InRoom Bronze PowerSub Specifications

Cabinet dimensions and shipping weight for the InRoom Bronze PowerSub.

InRoom Silver PowerSub Specifications

Cabinet dimensions and shipping weight for the InRoom Silver PowerSub.

InRoom Gold PowerSub Specifications

Cabinet dimensions and shipping weight for the InRoom Gold PowerSub.

InWall Bronze;4 PowerSub Specifications

Cabinet dimensions and shipping weight for the InWall Bronze/4 PowerSub.

InWall Bronze;6 PowerSub Specifications

Cabinet dimensions and shipping weight for the InWall Bronze/6 PowerSub.

InWall Bronze;10 PowerSub Specifications

Cabinet dimensions and shipping weight for the InWall Bronze/10 PowerSub.

InWall Silver;15 PowerSub Specifications

Cabinet dimensions and shipping weight for the InWall Silver/15 PowerSub.

InRoom Platinum PowerSub Specifications

Triad Platinum PowerSub Amplifier Features and Adjustments

Bass Extension (Hz) Control

Adjusts the lowest frequency the speaker will play, with specific settings for THX.

Input Level Adjustment

Adjusts loudness to match front speakers; set lower for multiple subs.

Low Pass Filter (Hz) Adjustment

Sets the highest frequency for crossover point between sub and satellites.

Phase Control

Fine-tunes musical blend between sub and satellites by adjusting signal timing.

Mono;THX Input Connection

Connects to 'sub out' from a THX Processor or THX Receiver.

Left & Right Inputs Connection

Connects to RCA jack inputs for pre-amp out from processors/pre-amps.

Platinum PowerSub Speaker to Line Level Converter

Converts speaker level from receiver/amp to line level for PowerSub inputs.

InRoom Platinum PowerSub Amplifier Wiring Diagrams

Multi Channel Surround Wiring

Preferred line level connection method for multi-channel surround setups.

2 Channel Stereo Wiring

Alternate speaker level connection method for stereo setups.

Triad Rack Amplifier Wiring

Front Panel Adjustments Guide

Overview of front panel controls for LEVEL, LOWPASS 1, LOWPASS 2, and PHASE.

A;V Receiver Speaker Level Output Wiring

Diagram for connecting A/V receiver speaker level outputs to the amplifier.

THX;Processor Line Level Sub-Out Wiring

Diagram for connecting THX processor line level sub-out to the amplifier.

Warranty and Product Information