Operation
The two-channel microprocessor temperature controller designed to control
the heater, ensures comfort, efficiency, and safety.
The heating is controlled by means of two temperature sensors:
One controls the room temperature.
The other sensor monitors the surface temperature of the heater.
Once the necessary temperature in the room is set, the controller will, depending on heat losses in
the room, automatically adjust the temperature of the heater, as well as the load on the electricity
grid (100% or 50% of capacity).
The heater works as required to maintain the required temperature in the room.
Room Temperature setting range.
+5 - + 35 ° C, step of 0,5 ° C.
Panel surface temperature range
40 - 95° C (95 ° C).
During normal operation the heater displays the room temperature.
The Heating indicator is on solid for 100% power and flashes when power is reduced to 50%
To Next Page
Loading...
