13
5V_500mA
First you must use the rechargeable batteries. When
the energy is less than 20%, you should charge the
batteries.
Long time low energy, the life of the batteries will be
short. When charging, the battery indication on LCD
will flash. After charging fully, the indication will stop
flashing and show full. Don't charge for more than 24 hours.
If charging while using the device, the time will be longer.
The rechargeable batteries must be in device when you
use the AC/DC adaptor for charging. And do not charge
the non-rechargeable batteries, or the device will be
destroyed and also lose theguarantee.
Battery charge
REF
Unit
Save
VFL
Optical Power Meter
>2s PERM
dBm
1KHz
PERM
nm
REF
Save
GLINT
VLS
To Next Page
Loading...
Need help?
General
